RDS PRO-3

RDS PRO-2

Fully-featured RDS / RBDS Encoding with LCD:

FLEXIBLE, PROFESSIONAL AND COST-EFFECTIVE



A fully featured, reliable RDS / RBDS encoder. Tired of problems on other low-cost RDS encoders…


Difficult-to-use, unreliable software, unacceptable interference to stereo audio or missing RDS features like EON? Need advanced control features to save the cost of dedicated data and control circuits?


You can solve all these problems and save money at the same time with the RDS PRO-3 encoder.
NOW with basic UECP support for TMC and RT+ applications!


BENEFITS:


• VERY cost effective
• Making life easier for broadcast professionals: quick and easy
hardware integration
• Save time with intuitive, well-developed programming software
• Don’t miss out: feature set includes every RDS function most
stations will need
• LCD enables quick onsite validation of transmitted
data without using a PC


APPLICATIONS:


• RDS / RBDS encoding for stations of all sizes (includes EON)
• Network Radio
• Local Commercial Radio
• Community Radio


FEATURES:


• A properly designed and implemented RDS solution for FM broadcasters
• Switchable MPX (Composite) loop-through mode
• Maintains programme reliability in loop mode – automatic MPX ‘pass-through’ relays
• RS-232 & USB control based on simple ASCII commands or basic UECP implementation
• Powerful Windows based configuration utility for easy initial setup
• All user adjustments accessible from front/rear panel – no need to take the lid off
• Addressing – independent or common control of up to 255 units in a network
• Advanced weekly scheduling in Stand-Alone and PC-Dependent modes
• Define up to 99 different messages or link to an automation system
• Internal real-time clock with battery backup for correctly inserted clock-time facility
• External contact closure TA switch
• Four modes of Dynamic / ‘Scrolling’ PS (where legal)
• No special 19 kHz input needed – pilot tone recovered from the MPX signal
• LCD display
• Four modes of Dynamic / ‘Scrolling’ PS (where legal)

SPECIFICATIONS:


RDS Data Groups Supported:
PI – Program Identification
M/S – Music/Speech
PS – Program Service
PIN – Program-Item Number
PTY – Program Type
ECC – Extended Country Code
TP – Traffic Program
RT / RT+ – RadioText including Tagging
AF – Alternative Frequencies
TDC – Transparent Data Channels
TA – Traffic Announcement
IH – In House Applications
PTYN – Program Type Name
ODA – Open Data Applications
DI – Decoder Identification
CT – Clock-Time and Date
EON – Enhanced Other Networks information
TMC – Traffic Message Channel


Output RDS signal amplitude:
Adjustable <25mV to >1.4 V pk-pk


RDS Signal Bandwidth:
+/- 2.4 kHz (-50 dBc)


RDS Spurious Suppression:
> 90 dB


RDS Harmonics Suppression:
> 80 dB


MPX Loop-Through Voltage Gain:
1.00 (guaranteed from 2 Hz to 100 kHz)


Clock Reference:
Pilot Tone or Internal Generator


19 kHz Pilot PLL Lock Bandwidth:
software switchable +/- 5 Hz or +/- 2 Hz


Pilot Tone Level:
min. <50 mV pk-pk


Phase Shift Adjust:
0-180 degrees in 9.5 degrees steps


Signal Connectors:
Unbalanced, BNC, 50-Ohm


Data Connector:
RS-232 (9 pin f), bidirectional


Noise Protection:
Three-Fold Level Sampling


Com. Speed:
Software switchable 1200-19,200 kbps


Com. Mode:
8 data bits, no parity, 1 stop bit


UECP Protocol Support:
Basic implementation for TMC and RT+


Power:
100 – 240V AC / 7.5 Watts. (Acceptable range 88 to 264V AC)


Dimensions and Weight:
1-RU: 44 x 482 x 290mm deep
1.75” x 19” x 11.25” deep
Weight: 1.8kg / 4lbs


Computer Control:
All parameters can be accessed and modified under PC control (GUI software included), USB (front
panel, plus RS-232 (rear panel). ASCII text-based command format.


Warranty:
Three Year return-to-base warranty


Defining Specifications:
CENELEC EN50067


Approvals:
CE (EMC & LVD), RoHS


[PRODUCT INFORMATION Issue 1.00 – E&OE – SUBJECT TO CHANGE WITHOUT NOTICE.]


© 2016 Tüm hakları saklıdır. | Tasarım & Kodlama: Arivisti